MEng Chemical with Nuclear Engineering

Imperial College London
Posted on:

Type

Master's programs

MEng Chemical with Nuclear Engineering

Study chemical engineering with a specialist focus on nuclear engineering in this professionally accredited, integrated Master’s degree.

Key information

  • UCAS course code:n/a*

Overview

Chemical engineers bring about innovation and improvements in process industries, such as those concerned with the manufacture of chemicals, food, fuel and pharmaceuticals.

The Department of Chemical Engineering was founded in 1912 and undergraduate degrees were first formally taught from 1937.

On this professionally accredited course, you will learn to apply scientific, engineering and business principles to a variety of complex practical issues.

Students on this course will be fully qualified in Chemical Engineering but will also take a series of specialist modules which will give you a basis for employment in the nuclear and related industries.

Study programme

All Chemical Engineering students study the same core programme for the first two years, covering fundamental science and mathematics and how these apply to practical engineering problems.

Throughout your programme of study, you will develop a strong foundation in the fundamental principles of science, mathematics and engineering and use this to build sound practical expertise and engineering judgement.

You will study core chemical engineering subjects and will be able to demonstrate your competency in these subjects through the use of the ‘mastery’ concept. There is a particular emphasis on mathematics throughout the programme, and we are working on processes to enhance student engagement and response in this topic through the use of gaming apps. 

As the course progresses, you will cover more specialist content, relevant to the nuclear engineering component of the course.

Your study reaches Master’s level in the fourth year, with advanced modules and a substantial research project. Studying to this level means that graduates require fewer years of work experience to become a Chartered Engineer (see Professional Accreditation below).

Environmental effects of chemical operations are highlighted throughout the course, with an emphasis on successful control and mitigation. There are also major optional modules in which environmental technology themes can be taken further. Attention to safety engineering is closely integrated with many of the modules and in most projects, a safety audit is required.

Project work

There is an emphasis on project work throughout the course, which increases in complexity each year. Projects consist of design work, theoretical and computing studies, and practical work in our laboratories, including in our state-of-the-art Carbon Capture Pilot Plant.

Projects are completed in pairs and sometimes larger groups, and ensure collaboration with academic teaching staff (who assess progress) and the development of vital transferable skills, such as teamwork and communication.

Much of your project work will be grounded in real industry problems, and all students have the opportunity to complete an industry-based project towards the end of their degree.

In your final year, you will also complete a major project covering all aspects of the design of a chemical plant. As with all projects, the work is finally reported fully in writing for assessment of the technical merit and effective communication, which is a replicate of reporting structures used in industry.

Transfer between courses

You can normally transfer onto this course up until the start of the third year.

We also offer a Chemical Engineering degree with a Year Abroad. It is possible to transfer onto this course, but year abroad places are limited and eligibility criteria apply.

If you are an international student, transferring to a different course could have an impact on your Tier 4 visa. Please visit our International Student Support webpage for further information.

Structure

Find out more about the limited circumstances in which we may need to make changes to or in relation to our courses, the type of changes we may make and how we will tell you about them.

Year 1

  • Project Management
  • Combined flow-sheeting and process synthesis design
  • Mechanical design of a pressure vessel - you will take an engineering graphics course and produce a detailed engineering drawing
  • A combined economic, social and technical analysis of proposed new technology

Year 4

You complete an advanced research project at Master's level over one or two terms.

Advanced Chemical Engineering Design Practice: Final Year Design

You undertake a major project covering all aspects of the design of a chemical plant:

  • the synthesis of a process
  • detailed design of key units
  • plant control (including start-up and shut-down procedures)
  • plant safety and layout (including environmental impacts of the plant);
  • development of a sound business plan

Optional modules

You choose three of the optional modules below, without choosing modules you have already studied in Year 3.

  • Advanced Bioprocess Engineering
  • Colloid and Interface Science
  • Dynamical Systems in Chemical Engineering
  • Long Research Project
  • Modelling of Biological Systems

Further options

You can substitute a choice from above for an Inter-Departmental Exchange.

Download the programme specification [PDF] – this is the most up-to-date version available for this course. It may change for your year of entry. If/when changes to this course are approved by the College, we will update this document and the information on this course page.

I-Explore

Through I-Explore, you'll have the chance to deepen your knowledge in a brand new subject area, chosen from a huge range of for-credit modules.

All of our undergraduate courses include one module from I-Explore's wide selection. The module you choose will be fully integrated into your course's curriculum and count as credit towards your degree.

Professional accreditation

This degree leads to a Master’s level qualification and is professionally accredited by the Institution of Chemical Engineers (IChemE).

Achieving a professionally accredited integrated Master's degree (MEng) means that you have satisfied the first step to becoming a Chartered Engineer (CEng) in your chosen field by satisfying the educational requirements of professional registration. To gain Chartered status, you will need to demonstrate your ability to meet additional graduate level competences described in the Engineering Council's UK-SPEC

A CEng is a highly respected qualification earned by professionals working in engineering, which can lead to higher earning potential and better career prospects.

Professional registration also brings international recognition of your qualification, which is particularly useful for students preparing for a career abroad.

Find out more about the route to becoming a Chartered Chemical Engineer on IChemE's Get Chartered website.

The department went through a successful accreditation process during the 2019-20 academic year and was successful in renewing its accredited status for a further five years. The accreditation panel highlighted particular areas of good practice: exposure to real-life engineering through our pilot plant, experiential and scaffolded learning through labs, and a gaming app to support conceptual learning.

Associateship

As well as your main Imperial degree, you will also receive the award of the Associateship of the City and Guilds of London Institute (ACGI) on completion of this course.

The City and Guilds of London Institute is one of three historic Colleges that came together to form Imperial College London in 1907.

Find out more about our Associateships.

Teaching and assessment

Teaching

You will be taught using a combination of lectures, tutorials, guest lectures and presentations. Throughout your programme, you will also build your practical expertise through lab-based modules and project work.

Formal teaching (for example lectures and tutorials) mostly takes place during the morning. Taught sessions in the afternoon are reserved for projects undertaken either singly, in a pair, or in a larger group, which enables you to develop vital transferable skills. There is a continuous design element running through all four years, seen a vital component of professional development in chemical engineering, with projects that increase in complexity each year.

Teaching, independent study and placement hours Year 1

Assessment

You are mainly assessed by yearly examinations, backed up with various open-book assessments, which allow you to demonstrate mastery of key course content, and consolidate the knowledge gained from lectures.

Most of the formal teaching takes place in one half of the day (either the morning or the afternoon). This includes lectures, problem classes and small group tutorials. The other half of the day is kept free for a series of projects undertaken either singly, in a pair, or in a larger group. This enables you to develop important teamwork skills.

There is a continuous design element running through all four years, with projects that increase in complexity each year.

Assessment types

50%
Based on the typical pathway through the course; percentages have been rounded to the nearest whole number

 

Staff expertise

You will be taught in a department of around 500 undergraduate students and over 200 postgraduate students. Teaching staff is made up of some 40 Professors, Readers, Lecturers and Teaching Fellows, 11 technical support staff, and 20 administrative and clerical staff. These people are the major resource for running the undergraduate course.

Compare this course

Discover Uni compares things like student satisfaction and what graduates do after they finish the course.

Because acceptance onto this course is via in-course transfer, it does not have its own Discover Uni page.

However, there is a high degree of overlap with the main course in this Department. You should look at the Discover Uni data for that course instead.

Entry requirements

We welcome students from all over the world and consider all applicants on an individual basis – see selection process below.

For advice on the requirements for the qualifications listed here please contact the Department (see Contact us).

We also accept a wide range of international qualifications. If the requirements for your qualifications are not listed here, please see our academic requirements by country page for guidance on which qualifications we accept.

A-levels

  • A* in Chemistry
  • A in Biology, Business Studies, Economics, Further Mathematics or Physics

If you’re studying four A-levels, we prefer the fourth to be in Physics, Biology, Further Mathematics, Business Studies or Economics at grade A.

General Studies and Critical Thinking are not accepted.

Typical offer range

As a guide, here are the typical offers made to at least 80% of A-level applicants for 2019 entry:

  • Three A-level offer: A*A*A–A*A*A*
  • Four A-level offer: A*A*AA

Practical endorsement (practical science assessment)

If you are made an offer you will be required to achieve a pass in the practical endorsement in all science subjects that form part of the offer.

The practical endorsement is part of the reformed English linear A-levels.

Additional Mathematics support

Our new A-level Mathematics online course covers a range of key topic areas to help you gain a deeper understanding of the skills and techniques required to succeed in your A-level Mathematics exams.

This optional course has been built around the A-level syllabus with the aim of developing your thinking skills, fluency and confidence.

Please note: this course is not compulsory and does not form part of the entry requirements for this course. It is available free of charge via the EdX website. It is self-paced so you can start it at any time.

International Baccalaureate

  • 7 in Mathematics at higher level
  • 7 in Chemistry at higher level
  • 6 in Biology, Business Management, Economics or Physics at higher level

Typical offer range

As a guide, the typical offer made to at least 80% of IB applicants for 2019 entry was 41 points.

Mathematics Higher Level for award in 2021

For entry in 2021, the Mathematics Analysis and Approaches or the Applications and Interpretation syllabi will be accepted at higher level with no preference.

Additional Mathematics support

We have recently launched an A-level Mathematics online course, which is available free of charge via the EdX website.

Although this optional course has been built around the A-level syllabus, it is relevant to your curriculum too.

Please note: this course is not compulsory and does not form part of the entry requirements for this course. It is self-paced so you can start it at any time.

Advanced Placements

The grades detailed below are the minimum requirements for students offering only Advanced Placements as their exams for entry to Imperial.

If you are studying a High School Diploma that is accepted by Imperial alongside Advanced Placements, requirements may apply to both your Diploma and Advanced Placements.

Please consult our country index to check whether we accept your High School Diploma programme for admission.

Our minimum requirement for this course is grades 5, 5, 5 to include:

  • 5 in Calculus BC

Additional Mathematics support

We have recently launched an A-level Mathematics online course, which is available free of charge via the EdX website.

Although this optional course has been built around the A-level syllabus, it is relevant to your curriculum too.

Please note: this course is not compulsory and does not form part of the entry requirements for this course. It is self-paced so you can start it at any time.

Selection process

Assessing your application

Admissions Tutors consider all the evidence available during our rigorous selection process and the College flags key information providing assessors with a more complete picture of the educational and social circumstances relevant to the applicant. Some applicants may be set lower offers and some more challenging ones.

Post-application open day and interview

If your UCAS application indicates that you are likely to satisfy our requirements and you live within reasonable travelling distance of the College you will be invited to visit the Department.

During this visit, you will meet members of the teaching staff and a number of current students.

You will attend an interview on a one-to-one basis and be shown the teaching facilities of the Department, as well as various features of the College. This includes a tour of our residential accommodation and some of our recreational facilities.

We conduct interviews in south-east Asia for our applicants there.

Due to the demanding nature of courses, you need to be highly qualified and motivated to study at Imperial. As a result, both academic and personal qualities are taken into account when we make offers.

We will also take into account the comment of the member of staff who you met, including when we decide (for example after A-levels) whether to confirm our offer should you fail marginally to satisfy the entry conditions.

Pilot admissions schemes (Home students)

From 2020 entry, we will be using information about our applicants in a number of new pilot admissions schemes, to consider the wider context of Home students from groups underrepresented at the College.

Academic Technology Approval Scheme (ATAS)

An ATAS certificate is required for all Non-EEA/Swiss nationals who require a visa to study in the UK.

To apply for an ATAS certificate online, you will need your programme details and the relevant Common Aggregation Hierarchy (CAH) code and ‘descriptor’. For this course, these are:

CAH code

chemical, process and energy engineering

Your Tier 4 visa application, or extension of stay, will automatically be refused if you need an ATAS certificate and cannot provide one.For further guidance on obtaining an ATAS certificate please see the information on our International Student Support website.

English language requirement (all applicants)

All candidates must demonstrate a minimum level of English language proficiency for admission to the College.

For admission to this course, you must achieve the standard College requirement in the appropriate English language qualification. For details of the minimum grades required to achieve this requirement, please see the English language requirements for undergraduate applicants.

Tuition fees and funding

We charge tuition fees for every year that your course lasts. The fee you will be charged is based on your fee status, which is determined by government regulations.

Home rate of tuition

£9,250 per year.

For each subsequent year, you should expect and budget for your tuition fee to increase by an amount in line with inflation. The measure of inflation used will be the Retail Price Index (RPIX) value, taken from April in the calendar year in which the academic session starts. For example, the RPIX value in April 2022 will apply to fees for the academic year 2022–2023.

Whether you pay the Home fee depends on your fee status. Your fee status is assessed based on UK Government legislation and includes things like where you live and your nationality or residency status. Find out more about how we assess your fee status.

Government funding

If you're a Home student, you can apply for a Tuition Fee Loan from the UK government to cover the entire cost of tuition for every year of your course.

You can also apply for a means-tested Maintenance Loan to help towards your living costs.

EU/EEA students

The Government has confirmed that EU students who begin a course in the 2020–21 academic year (until the end of July 2021) will be eligible to pay the same fee as Home students and have access to student finance for the duration of their course, as long as they meet certain requirements which are unchanged from previous years. This includes students who begin the course remotely.

Students from the EU, other EEA country and/or Switzerland starting a course on or after 1 August 2021 will no longer be eligible for the Home fee rate, and so will be charged the Overseas fee. Please note this does not apply to Irish students or students with Citizens Rights benefitting from Citizens’ Rights under the EU Withdrawal Agreement, EEA EFTA Separation Agreement or Swiss Citizens’ Rights Agreement respectively.

Overseas rate of tuition

£33,750 per year.

For each subsequent year, you should expect and budget for your tuition fee to increase by an amount in line with inflation. The measure of inflation used will be the Retail Price Index (RPIX) value, taken from April in the calendar year in which the academic session starts. For example, the RPIX value in April 2022 will apply to fees for the academic year 2022–2023.

Whether you pay the Overseas fee depends on your fee status. Your fee status is assessed based on UK Government legislation and includes things like where you live and your nationality or residency status. Find out more about how we assess your fee status.

EU/EEA students

The Government has confirmed that EU students who begin a course in the 2020–21 academic year (until the end of July 2021) will be eligible to pay the same fee as Home students and have access to student finance for the duration of their course, as long as they meet certain requirements which are unchanged from previous years. This includes students who begin the course remotely.

Students from the EU, other EEA country and/or Switzerland starting a course on or after 1 August 2021 will no longer be eligible for the Home fee rate, and so will be charged the Overseas fee. Please note this does not apply to Irish students or students with Citizens Rights benefitting from Citizens’ Rights under the EU Withdrawal Agreement, EEA EFTA Separation Agreement or Swiss Citizens’ Rights Agreement respectively.

Additional course costs

This section outlines additional costs relevant to this course. These are not included in your tuition fees. It's possible that all, or only some, of these will be relevant to you.

Figures are approximated, usually based on costs in the most recent academic year. They are likely to change each year but it's useful for you to be aware of the things you may have to pay for. This can help you budget for life at Imperial.

Mandatory costs are those that you will need to pay to fully participate in and complete your studies. Optional costs are not essential to your studies so you can opt-out of these.

Laptop computer

You will need a laptop for some classes and coursework. The laptop must meet a minimum specification. For the 2018–19 academic year this was:

  • Windows 10 capable
  • 8GB RAM
  • 256 GB SSD HDD

The Department has a number of laptops available for loan for the duration of your course. A deposit of £100 is required, refundable when you return the laptop at the end of your course.

You will have the chance to indicate whether you wish to take part in the laptop loan scheme when contacted by the Department in September before you start your course.

If you choose to borrow a laptop, you will be sent an invoice for the deposit amount which is payable online before the start of term. A variety of payment methods are available.

Accommodation and living costs

Living costs, including accommodation, are not included in your tuition fees.

Most Imperial undergraduates choose to live in our halls of residence in their first year. You can compare costs across different accommodation options.

Careers

Our graduates enjoy a wide choice of careers in the process, energy and healthcare industries and in companies involved in the design and construction of chemical plants. Many graduates have also entered research organisations, public utilities, consultancy and the information technology industry, with many opportunities for employment overseas.

Recent graduates of the Department have become:

  • Subsea Engineer, Shell
  • Engineer, National Environment Agency, Singapore
  • Technical Process Engineer, Exxon Mobil
  • Crude Oil Analyst, BP

UCAS Apply system

To apply to study at Imperial you must use the online application system managed by the Universities and Colleges Admissions Service (UCAS).

Application deadlines

All applications, other than those which include choices for medicine at Imperial, must be submitted to UCAS by 18.00 (UK time) on 15 January 2021 for entry in October 2021.

The deadline for medicine courses at Imperial starting in 2021 is 18.00 (UK time) on 15 October 2020.

Tracking your application

Once you’ve completed and submitted your application through UCAS’s online Apply service, you can use UCAS’ Track system to follow its progress and manage your choices.

Related departments

Chat to our students

Want to know what life at Imperial is really like? Use our online messaging service, Unibuddy, to chat to one of our current students.

Order a prospectus

For more information about Imperial and the courses we offer, you can download our prospectus or request a printed copy.

International students

Terms and conditions

There are some important pieces of information you should be aware of when applying to universities. We've put together this information in a dedicated section of our website.

Read our terms and conditions for these areas:

More Information

Posted on:

Type

Master's programs

United Kingdom